Primary treatment
Assessment of screening, settlement and physical-chemical treatment to prepare wastewater for downstream processes.
We use analytics cookies to understand how visitors use this site and to measure our marketing. They are only set if you accept. See our privacy policy.
Practical engineering for reliable treatment.
Independent process engineering for industrial effluent and wastewater systems, from treatment assessment and design to troubleshooting and plant improvement.
Discuss your treatment requirementsWe assess influent quality, flow variation and required effluent quality to establish a practical basis for your effluent treatment plant. Our reviews bring together operating data, plant capacity and site constraints to guide design and improvement decisions.
Assessment of screening, settlement and physical-chemical treatment to prepare wastewater for downstream processes.
Process assessment and design review for organic load and nutrient removal.
Filtration, polishing and disinfection assessed against discharge or intended reuse requirements.
Review flow, wastewater composition and changes associated with production or cleaning.
Assess treatment performance against the site’s discharge or reuse requirements.
Investigate foaming, poor settlement and unstable treatment using plant data.
Identify constraints in existing industrial wastewater treatment plants and compare operational improvements with upgrade options.
Review aeration, pumping and dosing to identify practical efficiency opportunities.
Consider sludge production and handling requirements within the overall treatment assessment.
Process selection considers wastewater characteristics, treatment targets, available space and operating requirements.
We combine operating records, laboratory results and process knowledge to assess performance and prioritise the next steps.
An effluent treatment plant treats the wastewater produced by an industrial site so it can be discharged within its consent or reused. A typical industrial ETP combines pre-treatment such as screening, equalisation and dissolved air flotation with biological treatment and, where needed, tertiary polishing.
Yes. We review the operating data and influent loads to find the cause, whether that is load variation, a biological upset, a capacity limit or a control problem, and recommend operational changes before capital spend.
It depends on the effluent. Common steps are screening, flow and load equalisation, pH adjustment, and oil, fat and solids removal by settlement or dissolved air flotation, to protect the biological stage and meet trade effluent limits.
We provide independent process design, design review and treatment selection for new and upgraded industrial wastewater treatment systems. We do not supply equipment, so the process is chosen for your effluent rather than a product range.
Often, yes. Treated effluent can supply cooling water, washing or process uses after suitable tertiary treatment, sometimes including membranes. We assess which streams are worth reusing and what treatment they need.
Tell us about your wastewater source, flow, treatment requirements and current concern.
Contact an engineer