Waterna RO Insight™
Understand performance. Plan your next move.
Turn routine RO plant data into engineering insight for membrane health, cleaning decisions and energy performance.
AI-assisted RO monitoring and analytics software, built for reverse osmosis, not a generic plant AI.
Start with your own data: a detailed report on potential operational improvements, energy savings and lower operating costs.
- 100+ engineering indicators
- Multi-rack analysis
- Offline AI assistant
- Fleet benchmarking
Nine diagnostic engines, grounded in process engineering
- 01
Fouling & membrane health
Separates permeability loss from damage to the salt barrier, using the water and salt transport coefficients, before production is affected.
- 02
CIP lifecycle
Detects each clean, scores how much performance it recovered, and forecasts when the next one is due for each rack.
- 03
Scaling risk
Tracks carbonate scaling and a multi-salt saturation model, corrected for temperature, and names the limiting mineral as risk rises.
- 04
Energy optimisation
Prices the energy cost of fouling and excess feed pressure, and checks energy recovery device efficiency, in kWh/m³.
- 05
Fleet benchmarking
Ranks every rack against the fleet on normalised performance, so hidden underperformers stand out.
The five above work alongside membrane integrity, rack availability and uptime, data quality and dynamic alert baselines. Each runs continuously and explains itself: a finding, its likely cause and a recommended action, traceable back to its inputs.
Monitoring that keeps working between reviews
Scheduled reports
Daily, weekly and monthly reports are produced automatically, such as a weekly fouling and CIP summary, ready for the people who act on them.
Forecast alerts
Get warned while a value is still normal, when its trend is heading for a limit, with an estimate of how long you have.
Operator notes on the timeline
Record a dosing change or a clean against the data it explains, so the reason behind a trend is never lost.
Answers that show their working
Every assistant answer comes with the data it used and a confidence level, so engineers can check it rather than trust it.
Built-in AI assistant
Ask questions in plain language and keep the analysis on site. Forecasting uses an existing machine-learning model applied to your plant's own history.
Give me a concise summary of the current plant status.
Summary of current plant status
Overall performance
- Fleet average recovery: 38%
- Fleet average flux: 10.89 LMH
- Fleet average normalised flux: 6.62 LMH
- Fleet average RO feed pressure: 78.9 bar
- Fleet average normalised ΔP: 4.16 bar
Racks status
- Racks running: 4 of 5
- Racks in CIP: 0
- Rack_01: Idle since 2025-11-26
- Runs offline, on your hardware
- Grounded in your plant data
- Suggests investigation steps
Safe to connect to a running plant
Read-only, always
RO Insight™ reads plant data. It never writes setpoints, sends commands or takes control of any equipment.
Your data stays on site
Deploy on-premise, with the AI assistant running offline on your own hardware. Cloud is available if you prefer it.
Auditable results
Every finding is built on first-principles engineering calculations, validated against a membrane manufacturer’s calculation sheet, and traces back to the readings it came from.
Data you can trust
65 data-quality checks score every rack, from spikes and flat-lines to flow and salt mass balance, and flag late or stale signals before they skew a result.
One KPI framework, from control room to boardroom
100+ engineering indicators, normalised to standard conditions and grouped by the people who act on them.
Operations
Live performance
- Recovery %
- Flux (LMH)
- Differential pressure
- Salt passage %, front and rear
- Net driving pressure
- Feed pressure
Maintenance
Asset health
- Normalised flux
- Normalised ΔP
- Fouling factor
- Water transport coefficient
- Salt permeability
- CIP effectiveness %
Management
Financial value
- Specific energy (SEC)
- Power reduction %
- Daily and annual saving
- Energy cost impact
Operational performance asset health financial value
Start with your own plant data
- 01
Share your history
Send up to 12 months of operating data as a historian, SCADA or CSV export. Nothing connects to your plant, and a full year covers the seasonal temperature profile.
- 02
Receive your performance report
We analyse your data with RO Insight™ and walk you through a detailed report on potential operational improvements, energy savings and ways to reduce operating costs.
- 03
Subscribe
Run it continuously over a live, read-only OPC UA feed; we map tags and racks, check the connection and set baselines.
Questions people ask
Is this a general-purpose AI chatbot?
No. RO Insight™ is built specifically for reverse osmosis. Its findings come from process engineering calculations on your own plant data, and the assistant answers from that data, showing what it used and how confident it is.
Does RO Insight™ normalize RO performance data?
Yes. Permeate flow, salt passage and differential pressure are normalized to standard conditions, correcting for feed temperature, salinity, recovery and pressure, so you see real changes in membrane condition rather than swings caused by operating conditions.
Can it detect membrane fouling before production is affected?
Yes. It separates loss of permeability (fouling) from damage to the salt barrier using the water and salt transport coefficients, tracks scaling risk by limiting mineral, and flags the trend early enough to plan a clean rather than react to it.
How is RO Insight™ different from SCADA or a water monitoring system?
SCADA and general water monitoring systems show raw values and alarms. RO Insight™ reads the same data, read-only, and turns it into RO analytics: normalized performance, fouling and scaling diagnosis, cleaning effectiveness and energy indicators, each with an explanation of the finding.
Is RO Insight™ a water treatment AI platform?
Yes, for reverse osmosis. It combines engineering calculations (normalization, membrane transport coefficients and scaling indices) with AI that forecasts performance trends and an assistant that explains each finding from your own plant data. It supports decisions on energy use, membrane life, cleaning and antiscalant dosing. It advises your operators; it does not write setpoints to the DCS.
Can RO Insight™ change anything at my plant?
No. It is read-only. It never writes setpoints, sends commands or takes control of equipment. Decisions stay with your operators and engineers.
What data do you need?
Twelve months of operating history, so the analysis covers a full seasonal temperature profile. Data can come from historian or SCADA exports, CSV files, or a live, read-only OPC UA connection to your DCS.
Which control systems can it connect to?
Any DCS or SCADA system with an OPC UA server. The connection is read-only by design. Tags are mapped from an engineer-checked list, with exact matches only, and a connection check reads every mapped tag and produces an Excel report before go-live.
What if our instruments are giving bad readings?
RO Insight™ checks the data before it trusts it. 65 data-quality rules look for out-of-range values, spikes, flat-lines and flow or salt mass-balance errors, give each rack a quality score, and raise an alert when signals stop updating.
Can operators change the engineering settings?
No. Operators see the dashboards, alerts and plant log. Plant design values, baselines and diagnostic rules sit behind engineer mode, so they are set by the engineers responsible for them.
Does RO Insight™ work on industrial RO systems?
Yes. As well as seawater and brackish water desalination plants, RO Insight™ monitors industrial RO systems producing boiler feed, process and high-purity water, including single-stage, two-stage and two-pass plants, with or without energy recovery.
Does it cover ultrafiltration or other processes?
RO Insight™ supports reverse osmosis: seawater and brackish water desalination plants and industrial RO systems. For UF systems, our UF & RO Performance Assessment service covers the engineering review.
Where is RO Insight™ available?
In the United Kingdom, the European Union, the United States, Canada, Australia and Africa.
Can we try RO Insight™ before we subscribe?
Yes, in two ways. See the live demo, running on sample plant data, in a session with one of our engineers: request one at waterna.co.uk/ro-insight/demo. Or start with your own data: share up to 12 months of operating history as a file export, and we analyse it with RO Insight™ and walk you through a detailed report identifying potential operational improvements, energy savings and opportunities to reduce operating costs. Nothing connects to your plant.
How is it priced?
By subscription, scaled to the size of your plant. Contact us to discuss your requirements.
See what your RO data can tell you.
Start with your own data: analyse up to 12 months of plant history and receive a detailed report on potential improvements, energy savings and lower operating costs.
Software backed by process engineers: add an independent UF & RO Performance Assessment.





