WaternaCall us+44 7450 201927

Produced Water Treatment

Treatment matched to your production conditions.

Independent process engineering for produced water management in the oil and gas industry, from characterisation and treatment selection to design review and optimisation of oilfield water treatment.

Discuss your produced water project

Start with the water and its destination

We assess produced water characteristics, operating conditions and the required treated water quality to establish a practical treatment basis. Our reviews consider upstream separation, production chemicals and the interfaces with discharge, reinjection or reuse systems.

Produced water treatment areas we support

Oil & solids removal

Assessment of separation and solids removal stages against feed conditions and treatment targets.

Polishing & filtration

Review of downstream treatment to meet the required oil and solids specifications.

Discharge, reinjection & reuse

Treatment options assessed against the requirements of the intended water destination.

Where we can help

  1. 01

    Water characterisation

    Review composition, flow variation and sampling needs to establish the design basis.

  2. 02

    Separation performance

    Assess oil removal, solids loading and the performance of connected treatment stages.

  3. 03

    Chemical treatment

    Review dosing arrangements and potential interactions with downstream treatment.

  4. 04

    Water quality requirements

    Translate project-specific discharge, reinjection or reuse requirements into treatment targets.

  5. 05

    Capacity & operating changes

    Assess existing equipment against changing flows and production conditions.

  6. 06

    Troubleshooting & upgrades

    Investigate shortfalls and compare operating improvements with modification options.

Treatment processes

  • Gravity and plate separation
  • Hydrocyclones
  • Induced and dissolved gas flotation
  • Walnut shell and media filtration
  • Cartridge filtration
  • Chemical treatment and demulsification

Membrane and additional polishing options are assessed where appropriate to the water quality and treatment duty.Scaling and chemical compatibility are considered as part of the process assessment.

Independent review of your treatment package

We review the process basis, equipment duty, operating flexibility and package interfaces to help you assess proposals and identify technical gaps.

Frequently asked questions

What does produced water management involve?

Produced water management covers how water produced with oil and gas is separated, treated and sent to its destination, whether reinjection, disposal, discharge or reuse, while meeting the specification for that route at the lowest cost.

Can produced water be recycled or reused?

Yes, for some uses. Produced water recycling is common for re-use in drilling and fracturing operations after basic treatment. Reuse outside the oilfield usually needs extensive treatment, often including desalination, because of the high salinity.

How is produced water disposed of?

Mainly by reinjection, either into the producing reservoir or into disposal wells, or by discharge where a permit allows, such as offshore. Each route sets different limits on oil, solids and scaling, which drive the treatment design.

Do you review produced water treatment packages?

Yes. We review the process basis, equipment selection and guarantees of produced water treatment packages from the operator’s side, and assess existing oilfield water treatment against changing flows and water quality.

Discuss your produced water challenge

Tell us about your water composition, flow, existing treatment and required outlet quality.

Contact an engineer

+44 7450 201927[email protected]